3.
Place a passenger airbag on the crash pad and tighten the passenger airbag (A) mounting bolts.
Remove the ignition key from the vehicle.
Disconnect the battery negative cable from battery and wait for at least thirty seconds
before beginning work.
Place a passenger airbag on the crash pad and tighten the passenger airbag (A) mounting bolts.
Install the crash pad.
(Refer to Body - "Main crash pad assembly")
Connect the passenger airbag connector (B).
Tighten the passenger airbag mounting bolts (A).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Reinstall the glove box housing.
(Refer to Body - "Glove box housing")
Reconnect the battery negative cable.
After installing the passenger airbag (PAB), confirm proper system operation:
Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
