4.
After loosening the mounting screws, then remove the crash pad center lower panel (A) by using a screw driver.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
Remove the glove box housing.
(Refer to Crash Pad - "Glove Box Housing")
After loosening the mounting screws, then remove the crash pad center lower panel (A) by using a screw driver.
Install in the reverse order of removal.
Make sure the connector are connected in properly.
Replace any damaged clips.
