Check that the switch operates properly after disconnecting the room lamp connector (A).

Disconnect the negative (-) battery terminal.

Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver.

Separate the room lamp (A) from the roof trim after loosening the screws (2EA).

Remove the room lamp (B) after disconnecting the connector (A).

If it is necessary to replace the bulb, replace the bulb (A) after detching the lamp lens.

Disconnect the negative (-) battery terminal.

Remove the vanity lamp assembly (A).

Remove the vanity lamp assembly (B) after disconnecting the connector (A).

If it is necessary to replace the bulb, replace the bulb (A).

Disconnect the negative (-) battery terminal.

Remove the personal lamp assembly (B) after disconnect the connetor (A).

Install the room lamp assembly after connecting the lamp connector.

Install the lens after assembling the bulb.

Install the personal lamp assembly after connecting the lamp connector.

Install the vanity lamp assembly after connecting the lamp connector.