Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch.
No. | Description |
1 | Ground (-) |
2 | Door (-) |
3 | Room/ Door (-) |
4 | Battery (+) |
Disconnect the negative (-) battery terminal.
Remove the mounting screws (2EA).
And then remove the overhead console (A).
Remove the overhead console after disconnect the connectors (A).
If it is necessary to replace the bulb, replace the bulb (in the order as below).
Remove the overhead console lens (A).
Remove the bulb (A).
Install the overhead console lamp after connecting the connector.
Install the lens after tightening 2 screws.
