2.
Remove the drain plug (A) and drain the ATF totally and then reinstall the drain plug.
note
Must be replaced with new gasket when installing the drain plug.
Drain plug tightening torque:
33.3 ~ 43.1 N.m (3.4 ~ 4.4 kgf.m, 24.6 ~ 31.8 lb-ft)
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
Remove the drain plug (A) and drain the ATF totally and then reinstall the drain plug.
Must be replaced with new gasket when installing the drain plug.
Drain plug tightening torque:
33.3 ~ 43.1 N.m (3.4 ~ 4.4 kgf.m, 24.6 ~ 31.8 lb-ft)
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air cleaner")
Remove the eyebolt (A).
Tightening torque :
2.9 ~ 4.9 N.m (0.3 ~ 0.5 kgf.m, 2.2 ~ 3.6 lb-ft)
Fill the fluid about 5 liters through injection hole.
Perform the fluid level check.
(Refer to Hydraulic System - "Fluid")
