5928638

Check transponder

(1)

IGN "ON" & Engine "OFF"

(2)

Neutralize ECM and Register transponder key by GDS.

note

Pin code is requied to Neutralize ECM and to Register transponder key

(3)

Are Neutralizing and Registering completed normally ?

	▶ Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.
	▶ Substitute with a known-good transponder and perform key teaching procedure with scanner. If the problem is corrected, replace transponder and then go to "Verification of Vehicle Repair" procedure.