4.
Are any DTCs present ?
 | ▶ Go to the applicable troubleshooting procedure. |
 | ▶ System is performing to specification at this time. |
After a repair, it is essential to verify that the fault has been corrected.
Connect GDS and check "No. of Key learnt, ECM status and Smartkey ECM status.
Selet "Diagnostic Trouble Codes(DTCs)" mode and then clear DTC.
Operate the vehicle within the enable condition and monitor the DTC on the GDS.
Are any DTCs present ?
| ▶ Go to the applicable troubleshooting procedure. |
| ▶ System is performing to specification at this time. |
