Component Inspection
1.

IG "OFF"

2.

IG "ON".

3.

Drive the vehicle within DTC Detecting Condition in General Information, including the left turn one time and the right turn one time.

4.

Using a GDS, Clear DTC.

5.

Select "Diagnostic Trouble Codes(DTCs)" mode again.

6.

Are any DTCs present ?

▶ Substitute with a known-good Yaw sensor and check for proper operation. If problem is corrected, replace Yaw sensor and then go to "Verification of Vehicle Repair" procedure.

▶ Fault is intermittent caused by poor connection in Yaw sensor harness or faulty Yaw sensor. Go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика