13562386

Replacement

Rear Brake Pads

Loosen the guide rod bolt (B) and then remove the rear caliper body (A).

Tightening torque:

21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~23.1 lb-ft)

note

●

Where necessary prevent the guide rods from rotating with an appropriate wrench.

●

Be careful not to damage the dust covers.

Replace pad retainers (C) and brake pads (B) in the caliper carrier (A).

note

●

Clean the pad retainer surface at the caliper bracket.

●

Inspect the piston boots for damage and replace if necessary.

●

Check the smooth action of the guide rods, and their dust covers for damage.