1.
Installation is the reverse of removal.
(1)
Disconnect the select and shift cable assembly (B) after removing the pin (A).
(2)
Installation is the shift cable (A).
caution
Selected cable should be separated from the shift lever pin.
(3)
Installation is the shift lever assembly (A).
Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
(4)
Shift to the 3th gear position.
(5)
Insert the selected cable (A) to the shift lever assembly pin (B).
(6)
You have to push in the adjust (C).
(7)
Remove the neutral position pin (D).
(8)
Install the snap pin (E).
