3.
Install the seat belt pretensioner with a bolts (B, C).
Tightening torque [Bolt B]:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Remove the ignition key from the vehicle.
Disconnect the battery negative cable and wait for at least three minutes.
Install the seat belt pretensioner with a bolts (B, C).
Tightening torque [Bolt B]:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Connect the seat belt pretensioner (BPT) connector (A).
Install the upper anchor bolts.
Tightening torque:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Install the following parts.
(Refer to the Body group - "Interior trim")
Center pillar trim
Door scuff trim
Install the lower anchor bolts.
Tightening torque:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Reconnect the battery negative cable.
After installing the seat belt pretensioner, confirm proper system operation:
Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
