1.
After loosening the mounting bolt, then remove the rear seat cushion (A).
Tightening torque :
16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)
After loosening the mounting bolt, then remove the rear seat cushion (A).
Tightening torque :
16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)
After loosening the mounting bolts, then remove the rear seat back (A).
Tightening torque :
16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)
Installation is the reverse of removal.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts your hands.
Take care not to bend or scratch the trim and panels.
Remove the following items first :
Rear seat back assembly
After loosening the mounting screw, then remove the rear seat back webbing guide (A).
Remove the rear seat back folding knob (A) after turning in the counter clock-wise direction.
Zip off the rear seat back cover (A), and then full it up.
Remove the hog-ring clips (A).
[Lower]
[Upper]
Remove the rear seat back cover (A) from the frame.
After removing the hog-ring clips (B) on the rear of seat back and remove the rear seat back cover (A).
Installation is the reverse of removal.
To prevent wrinkles, make sure the material is stretched evenly over the cover (B) before securing the hog-ring clips (A).
Replace the hog ring clips with new ones using special tool [C (09880-4F000)].
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts your hands.
Take care not to bend or scratch the trim and panels.
Remove the following items first :
Rear seat back assembly
Rear seat back cover
After loosening the mounting bolts, then remove the rear seat latch assembly (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
Installation is the reverse of removal.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts your hands.
Take care not to bend or scratch the trim and panels.
Remove the following items first :
Rear seat back assembly
After loosening the mounting screw, then remove the rear seat back webbing guide (A).
Remove the rear seat back folding knob (A) after turning in the counter clock-wise direction.
Zip off the rear seat back cover (A), and then full it up.
Remove the hog-ring clips (A).
[Lower]
[Upper]
Remove the rear seat back cover (A) from the frame.
After removing the hog-ring clips (B) on the rear of seat back and remove the rear seat back cover (A).
Installation is the reverse of removal.
To prevent wrinkles, make sure the material is stretched evenly over the cover (B) before securing the hog-ring clips (A).
Replace the hog ring clips with new ones using special tool [C (09880-4F000)].
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts your hands.
Take care not to bend or scratch the trim and panels.
Remove the following items first :
Rear seat back assembly
Rear seat back cover
After loosening the mounting bolts, then remove the rear seat latch assembly (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
Installation is the reverse of removal.
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts your hands.
Take care not to bend or scratch the trim and panels.
Remove the following items first.
Rear seat cushion assembly
Remove the hog-ring clips (A).
After removing the hog-ring clips (B) on the rear of seat cushion and remove the rear seat cushion cover (A).
Installation is the reverse of removal.
To prevent wrinkles, make sure the material is stretched evenly over the cover (B) before securing the hog-ring clips (A).
Replace the hog ring clips with new ones using special tool [C (09880-4F000)].
