2.
Using a screwdriver or remover, remove the cluster fascia panel (A).
(Refer to the BD group - "Crash pad")
Take care not to scratch the center fascia panel and related parts.
Eject all the disc before removing the audio unit to prevent damaging the CD player's load mechanism.
Disconnect the negative (-) battery terminal.
Using a screwdriver or remover, remove the cluster fascia panel (A).
(Refer to the BD group - "Crash pad")
Disconnect the trip switch connector (A).
Using a screwdriver or remover, remove the center facia panel (A).
Disconnect the start/stop button connector (A).
After loosening the mounting screws, then remove the audio assembly (A).
Disconnect the audio connectors and cable (A).
Connect the audio unit connectors and cable.
Install the audio unit.
Install the center facia panel and start/stop button.
Install the cluster fascia panel and trip switch.
Check the audio system.
Make sure the audio head unit connectors are plugged in properly, and the antenna cable is connected properly.
