Component Inspection
1.

Ignition "ON" & Engine "OFF" and Using a scan tool, clear the DTC.

2.

Ignition "OFF".

3.

Disconnect the battery (-) terminal cable from the battery, and wait at least one minutes.

4.

Disconnect PSIS connector .

5.

Substitute the PSIS and check for proper operation.

6.

Is DTC present problem ?

▶ Substitute a known-good SRSCM, and check for proper operation.

If the problem is corrected, replace SRSCM and then go to "Verification of Vehicle Repair" procedure.

▶ Substitute a known-good PSIS, and check for proper operation.

If the problem is corrected, replace PSIS and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика