3.
Measure resistance between terminal “+” and “-“ of evaporator temperature sensor.
Turn the ignition switch OFF.
Disconnect the evaporator temperature sensor connector.
Measure resistance between terminal “+” and “-“ of evaporator temperature sensor.
Connect the evaporator temperature sensor connector.
Run the engine and turn the A/C switch ON, then measure the voltage between the terminals of harness connector.
Evaporator core temperature [°C(℉)] | Resistance [kΩ] | Voltage [V] |
-20(-4) | 29.42 | 3.736 |
-10(14) | 18.01 | 3.221 |
0(32) | 11.36 | 2.665 |
10(50) | 7.362 | 2.125 |
20(68) | 4.892 | 1.647 |
30(86) | 3.326 | 1.248 |
40(104) | 2.309 | 0.941 |
50(122) | 1.635 | 0.704 |
Disconnect the evaporator temperature sensor connector (A).
Remove the evaporator temperature sensor (A) by pulling it out after rotating 90° in a counterclockwise direction.
Installation is the reverse order of removal.
