2.
Remove the rear combination lamp (A).
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Put on gloves to protect your hands.
Take care not to bend or scratch the cover and other parts.
Disconnect the connector (B), and then loosen the rear combination lamp mounting nuts.
Remove the rear combination lamp (A).
After loosening the rear bumper side's mounting clip and screws, then disconnect the side's.
Loosen the mounting bolts.
Loosen the rear bumper side mounting scerw and clips.
Remove the rear bumper cover (A).
Disconnect the rear bumper main connector (A).
Installation is the reverse of removal.
Replace any damaged clips.
Make sure the connector is plugged in properly.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Put on gloves to protect your hands.
Take care not to bend or scratch the cover and other parts.
After loosening the mounting screws, then remove the rear combination lamp (A).
Disconnect the rear combination lamp connector (A).
After loosening the rear bumper side’s mounting screws and clip, then disconnect the side’s.
Loosen the rear bumper lower mounting bolts.
Loosen the rear bumper side mounting screw and clip.
Push the lock pin, disconnect the rear bumper main connector (A).
Remove the rear bumper cover (A).
Installation is the reverse of removal.
Make sure the connector is plugged in properly.
Replace any damage clips.
