Disconnect the negative (-) battery terminal.

Remove the front wheel guard.

(Refer to the BD group - "Front bumper")

Remove the front fog lamp connector (A) from the front bumper.

Remove the front fog bulb (A) turning it in the counterclockwise direction.

Install the fog lamp.

Reconnect the fog lamp connector.

Connect the negative (-) battery terminal.

Disconnect the negative(-) battery terminal.

Remove the lighting switch of the multi-function switch. (Refer to the multifunction switch)

With the front fog lamp switch, make sure that continuity exists between the terminals below.

If continuity is not as specified, replace the multi-function switch.