1.
Using a screwdriver or remover, remove the front door scuff tirm (A).
[Front]
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Using a screwdriver or remover, remove the front door scuff tirm (A).
[Front]
Remove the rear seat cushion.
(Refer to the BD group - "Rear Seat")
After loosening the mounting screws, then remove rear door scuff trim (A).
[Rear]
Installation is the reverse of removal.
Replace any damaged clips.
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Using a screwdriver or remover, remove the front pillar trim (A).
Installation is the reverse of removal.
Replace any damaged clips.
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Remove the following items.
Front door scuff trim
Rear door scuff trim
After loosening the mounting bolt, then remove the seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
Using a screwdriver or remover, remove the center pillar lower trim (A).
After loosening the mounting bolt, then remove the center pillar upper trim (A).
Installation is the reverse of removal.
Replace any damaged clips.
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Using a screwdriver or remover, remove the rear pillar trim (A).
Installation is the reverse of removal.
Replace any damaged clips.
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Rear seat assembly
(Refer to the BD group - "Rear Seat")
After loosening the mounting screws, then remove the rear door scuff trim (A).
Using a screwdriver or remover, remove the rear transverse trim (A).
After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
After loosening the mounting blots, then remove the rear seat bracket (A).
Using a screwdriver or remover, remove the luggage lamp (A).
Disconnect the lamp connector (B).
After loosening the mounting screws, then remove the luggage side trim (A).
Remove the rear seat belt upper anchor cover (A).
After loosening the mounting screws, then remove the rear pillar trim (A).
Installation is the reverse of removal.
Make sure the connectors are connected in properly.
Replace any damage clips.
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Remove the rear seat assembly.
(Refer to the BD group - "Rear Seat")
Using a screwdriver or remover, remove the rear pillar trim (A).
After loosening the mounting screws and clips, then remove the partition side trim (A).
After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
After loosening the mounting bolts, then remove the rear seat mounting bracket (A).
After loosening the mounting screw, then remove the rear wheel housing trim (A).
Disconnect the high mounted stop lamp connector (A).
Remove the rear seat belt cover (A).
Using a screwdriver or remover, remove the rear package tray trim (A).
Installation is the reverse of removal.
Make sure the connectors are connected in properly.
Replace any damaged clips.
Put on gloves to protect your hands.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Rear seat assembly.
(Refer to the BD group - "Rear Seat")
After loosening the mounting screws, then remove the rear door scuff trim (A).
Using a screwdriver or remover, remove the rear transverse trim (A).
After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
After loosening the mounting blots, then remove the rear seat bracket (A).
Using a screwdriver or remover, remove the luggage lamp (A).
Disconnect the lamp connector (B).
After loosening the mounting screws, then remove the luggage side trim (A).
Installation is the reverse of removal.
Make sure the connectors are connected in properly.
Replace any damage clips.
