4.
Are any DTCs present ?
 | ▶ System performing to specification at this time. Clear the DTC. |
 | ▶ Go to the applicable troubleshooting procedure. |
After a repair, it is essential to verify that the fault has been corrected.
Connect GDS and select "Diagnostic Trouble Codes(DTCs)" mode.
Using a GDS, Clear DTC.
Operate the vehicle within DTC Detecting Condition in General Information (Start and drive vehicle in gear and maintain vehicle speed at or above 15km/h. (9mph)).
Are any DTCs present ?
| ▶ System performing to specification at this time. Clear the DTC. |
| ▶ Go to the applicable troubleshooting procedure. |
