7376381

Component Inspection

■ Check throttle valve for stuck

IG "OFF" and disconnect the air hose between throttle body and air mass flow sensor.

Check stuck on throttle valve.

Is the throttle valve normal?

	▶ Go to "Check ETC motor resistance" as follows.
	▶ Repair or replace as necessary and go to "Verification of Vehicle Repair" procedure.

■ Check ETC motor resistance

IG "OFF" and disconnect ETC Motor & TPS connector.

Measure the resistance between ETC motor(+) and (-) terminals of ETC Motor & TPS connector (component side).

Specification : Approx. 1.5 ± 0.3Ω

note

To view Flash content, you need to install the appropriate browser extension

Is the throttle valve normal?

	▶ Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "Verification of vehicle Repair" procedure.
	▶ Substitute with a known - good ETC motor and check for proper operation. If the problem is corrected, replace ETC motor and go to "Verification of Vehicle Repair" procedure.