3.
Disconnect the vacuum hose (A) from the brake booster.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the battery and battery tray.
(Refer to the Engine Electrical group - "Battery")
Disconnect the vacuum hose (A) from the brake booster.
Remove the master cylinder.
(Refer to Master cylinder)
Remove the snap pin (A) and clevis pin (B).
Remove the mounting nuts (A).
Tightening torque:
12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)
Remove the brake tubes (A).
Tightening torque:
12.7 ~ 16.7 N.m (1.3 ~ 1.7 kgf.m, 9.4 ~ 12.3 lb-ft)
Remove the brake booster (B).
