4.
Remove the control cable (B) from the control shaft after removing the pins (A).
Move the shift lever to neutral gear position.
Remove the air cleaner assembly.
(Refer to "Intake and Exhaust system" in EM group)
Remove the battery and battery tray.
(Refer to "Charging system" in EE group)
Remove the control cable (B) from the control shaft after removing the pins (A).
Remove the control shaft complete (A).
Tightening torque :
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m,14.5 ~ 19.5 lb-ft)
Install in the reverse order of removal.
Install the control shaft compl ete after setting the neutral state.
Apply the sealant to the contact surface of transaxle and control shaft.
Specified sealant : Anaerobic adhesive for flange
