3.
Disconnect the passenger airbag connector (A) and remove the PAB mounting bolts (B).
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
Remove the glove box housing.
(Refer to the Body group - "Crash pad")
Disconnect the passenger airbag connector (A) and remove the PAB mounting bolts (B).
Remove the crash pad.
(Refer to the Body group - "Crash pad")
Replace the crash pad which is damaged while PAB is deployed.
Remove the mounting bolts from the crash pad. Then remove the passenger airbag.
The removed airbag module should be stored in a clean, dry place with the airbag cushion up.
