2.
After loosening the mounting bolt, then remove the seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
When installing the belt, make sure not to damaged the pretensioner.
Remove the following items first :
Front seat assembly
(Refer to the BD group - "Front Seat")
Front door scuff trim & Rear door scuff trim
(Refer to the BD group - "Interior Trim")
After loosening the mounting bolt, then remove the seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
Using a screwdriver or remover, remove the center pillar lower trim (A).
After loosening the mounting bolt, then remove the center pillar upper trim (A).
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
After disconnecting the pretensioner connector lock pin, remove the seat belt pretensioner connector (A), loosen the mounting bolts, then remove the pretensioner (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Installation is the reverse of removal.
Make sure the connectors are connected in properly.
Replace any damaged clips.
Remove the following items first :
Front seat assembly
(Refer to the BD group - "Front Seat")
Front door scuff trim & Rear door scuff tirm
(Refer to the BD group - "Interior Trim")
Front seat belt lower anchor
Center pillar lower trim
(Refer to the BD group - "Interior Trim")
Center pillar upper trim
(Refer to the BD group - "Interior Trim")
Front seat belt upper anchor
After loosening the bolts, then remove the height adjustor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)
Installation is the reverse of removal.
Make sure the connectors are connected in properly.
Replace any damaged clips.
Remove the front seat assembly.
Front seat assembly
(Refer to the BD group - "Front Seat")
Disconnect the front seat belt buckle connector mounting clip (A).
After loosening the mounting bolt, then remove the front seat belt buckle (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Installation is the reverse of removal.
Make sure the connectors are connected in properly.
Replace any damaged clips.
