Monitor GDS Data
■ Check DTC status
1.

Check DTC on the ECM with GDS.

2.

Check that there is any DTC related ECM.

3.

Perform Troubleshooting the DTC from ECM with appropriate DTC Troubleshooting Guide first.

4.

Repair or replace as necessary after erasing DTC with GDS.

5.

Check DTC on SmartKey Unit(SMK IMMO Unit) side and erase the DTC with GDS.

6.

Has the DTC gone after erasing with GDS ?

▶ Check poor connection between harness connector and SMK Module or ECM

: Thoroughly check the looseness, poor connection, bent, corrison, contamination, deformation or damage of connector. Repair or replace as necessary and then, go to "Verification of Vehicle Repair" procedure.

▶ "go to "Verification of Vehicle Repair" procedure.

▶ Go to " Inspection & Repair " procedure.

Яндекс.Метрика