1.
Install in the reverse order of removal.
note
●
The existing valve body cover gasket (A) must be replaced with new one. (Do not reuse it.)
●
Perform the procedures below after replacing the valve body assembly.
1.
Refill the automatic transaxle with fluid.
(Refer to "Hydraulic system (Fluid)" in this group)
2.
Reset the automatic transaxle adaptive values using the GDS.
3.
Perform the TCM adaptive values learning procedure.
(Refer to "Automatic transaxle control system (Adjustment)" in this group)
4.
Confirm the fluid leak from the each connections part in state of engine start.
