1.
Install in the reverse order of removal.
note
●
The existing valve body cover gasket (A) must be replaced with new one. (Do not reuse it.)
●
Perform the procedures below after replacing the solenoid valve.
1.
Refill the automatic transaxle with fluid.
(Refer to "Hydraulic system (Fluid)" in this group)
2.
Reset the automatic transaxle adaptive values using the GDS.
3.
Perform the TCM adaptive values learning procedure.
(Refer to "Automatic transaxle control system (Adjustment)" in this group)
4.
Confirm that there is no fluid leakage on connections after repairing.
