3.
Disconnect the solenoid valve connector (A).
Turn ignition switch OFF.
Remove the air cleaner assembly.
(Refer to "Intake and Exhaust system" in EM group.)
Disconnect the solenoid valve connector (A).
Measure the resistance between power terminal (5) and signal terminal (17).
Specification : 5.1 ± 0.3 Ω
It is not recommended to replace the solenoid valve of VFS type individually. If a solenoid valve of VFS type needs to be replaced, the valve body assembly should be replaced and the oil pressure should be adjusted. If the solenoid valve is replaced individually, it is not possible to adjust the oil pressure without additional equipment, and if the oil pressure adjustment procedure is not performed, a shift shock or delay may occur.
Replace the valve body assembly.
(Refer to "Hydraulic system (Valve Body)" in this group)
