Inspection
1.

Inspect diaphragm spring wear which is in contact with a concentric slave cylinder bearing.

2.

Check the clutch cover and disc surface for wear or cracks.

3.

Check the clutch disc lining for slipping or oil marks.

4.

Measure the depth from a clutch lining surface to a rivet. If the measured value is less than the specification below, replace it.

Standard value

Clutch disc thickness(A)[when free] :

8.3 ± 0.3 mm (0.3268 ± 0.0118 in.)

Clutch disc rivet depth(B) : 1.1 mm (0.0433 in.)

Яндекс.Метрика