1.
Disconnect the ignition lock switch connector (A).
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Disconnect the ignition lock switch connector (A).
Disconnect the push rod from the clutch pedal by removing the snap pin (A) and washer.
Remove the clutch pedal mounting nuts (A-4ea).
Tightening torque:
12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)
Remove the clutch pedal assembly.
