The PCM and the SMARTRA communicate by dedicated line. During this communication of PCM and SMARTRA, the K line of PCM cannot be used for communication. The PCM controls the communication either to SMARTRA or to other devices(e.g. scanner) on K line by switching of a multiplexer and specific communication procedures. The multiplexer is a part of PCM H/W.
The PCM sets DTC P1694 if Request from EMS is invalid.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
- | 1. Faulty EMS ※ Protocol layer violation - Invalid request - Check sum error |
Enable Conditions |
•
IG ON | |
Threshold value |
•
Protocol layer violation - Invalid request - Check sum error | |
Detecting time |
•
- | |
Fail Safe |
•
- |
Fig.1) A normal signal waveform of antenna and immobilizer communication when IG key(TP : Transponder) is OFF to ON.
