3.
Disconnect the clutch master tube line (B) after removing the pin on the clutch master cylinder.
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Remove the brake fluid from the clutch master cylinder reservoir with a syringe.
Clamp the clutch master cylinder hose (A). If there is not enough room for clamping, you can also clamp the hose from the brake master cylinder side.
Disconnect the clutch master tube line (B) after removing the pin on the clutch master cylinder.
Disconnect the ignition lock switch connector (B) and clutch switch (A).
Remove the clutch pedal assembly mounting nut (C-3ea) and bolts (D).
Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 Ib-ft)
Remove the clutch pedal and the master cylinder assembly together.
