3.
Disconnect the connector from the power window switch module.
Disconnect the negative (-) battery terminal.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
Disconnect the connector from the power window switch module.
Check for continuity between the terminals in each switch position according to the table.
Disconnect the negative(-) battery terminal.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
Remove the power window switch module (A) from the door trim after loosening the mounting screws (3EA).
Be careful not to damage door trim panel and door module mounting hooks.
Install the power window switch module.
Install the door trim panel after reconnecting the relevant connectors
Make sure that the power window switch module connectors are plugged properly.
Check that the power window switch and door lock switch operate normally.
