2.
After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
When installing the belt, make sure not to damage the retractor.
Remove the following items first.
Rear seat assembly
(Refer to the BD group - "Rear Seat")
Rear Pillar trim
(Refer to the BD group - "Interior Trim")
Package tray trim
(Refer to the BD group - "Interior Trim")
After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
After loosening the retractor (B) mounting bolt, then remove the rear seat belt (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Installation is the reverse of removal.
Replace any damaged clips.
Remove the rear seat cushion.
(Refer to the BD group - "Rear Seat")
Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
Installation is the reverse of removal.
