1.
Monitor MAP sensor current data after engine warming up.
■ Specification
caution
This current data is nothing but an example at certain condition. Thus, the real current data could be different from this example.
Monitor MAP sensor current data after engine warming up.
■ Specification
This current data is nothing but an example at certain condition. Thus, the real current data could be different from this example.
Is current data normal?
 | ▶ Go to "ETC system inspection" procedure. ▶ Go to "TPS inspection" procedure. ▶ Go to "ECTS inspection" procedure. |
 | ▶ Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. ▶ Check for open circuit in the MAPS circuit. ▶ Check for short to ground in the MAPS circuit. ▶ Substitute with a known-good MAPS and check for proper operation. If the problem is corrected, Replace the MAPS. |
