Inspect "Basic inspection" and "system inspection". Inspect "Basic inspection" first.
■ Fuel quality inspection
Inspect fuel leakage visually from fuel tank and fuel pump mounting point.
Inspect fuel quality and inside of fuel tank after removing fuel pump.
Check contamination of fuel filter and foreign substances in the fuel filter.
Art the fuel quality, fuel tank and fuel filter normal?
 | ▶ If fuel quality is normal, inspect sensors and actuator as below,
→ If all sensors and actuator are normal, Go to "System inspection" procedure. | ||||
 | ▶ Repair or clean the fuel tank (fuel line) as necessary. |
1. Toxic odor
2. Eyes stung
3. Hard vaporizing
4. Knocking suddenly after fuelling up
5. Hard starting after fuelling up (In the winter)
1. Knocking
2. Excessive fuel consumption
3. Poor power/acceleration
4. Fuel system damage such as fuel pump, Injector and component of the combustion-camber damage such as piston etc...
5. Deposit rising or corrosion (in the engine and fuel system)
6. Fuel pressure decrease or Engine stalling by vapor lock.
7. Impossible starting by low volatile
8. Discharge carcinogen
9. Discharge pollutant (CO, HC, NOx etc...)
