Diagnostic Procedure
1.

Check working sound of the fuel pump by using fuel pump actuation test.

2.

Is there working sound of the fuel pump?

▶ Go to "Fuel pump is OK" inspection procedure.

▶ Go to "Fuel pump is bad" inspection procedure.

Fuel pump is OK
Diagnostic Procedure

If fuel pump works well by using fuel pump actuation test, Inspect suspected causes as below.

Compression pressure

Injector

Air cleaner

ETC system

Catalytic converter

Fuel pump is bad
Diagnostic Procedure
3.

Remove the fuel pump relay.

4.

Connect switch terminal directly by using jump wire to operate a fuel pump and IG key "ON".

5.

Is the fuel pump operated directly?

▶ Go to "Fuel pump relay circuit inspection" procedure.

▶ Go to "Fuel pump circuit inspection" procedure.

Яндекс.Метрика