1.
Remove spark plug, and check spark plug condition and electrode gap.
■ Specification : Electrode gap 1.0~1.1㎜ (0.0394~0.0433 in.)
(1) Each center of two spark plug electrodes must be in a straight line.
(2) Check the electrode gap
Remove spark plug, and check spark plug condition and electrode gap.
■ Specification : Electrode gap 1.0~1.1㎜ (0.0394~0.0433 in.)
(1) Each center of two spark plug electrodes must be in a straight line.
(2) Check the electrode gap
Are spark plugs normal?
 | ▶ Go to "Ignition coil inspection" procedure. |
 | ▶ Substitute with a known-good spark plug and check for proper operation. If the problem is corrected, Replace the spark plug. |
