Component Inspection
C153212
1.

IG Key "OFF".

2.

Disconnect LKAS Switch connector.

3.

Measure resistance between terminals of LKAS S/W connector.

LKAS switch

ON

OFF

750Ω=(0.754KΩ) ± 10%

4.6㏀ ± 10%

4.

Is the measured value normal ?

▶ Go to "Verification of Vehicle Repair" procedure.

▶ Substitute with a known-good "LKAS ECU" and check for proper operation. If the problem is corrected, replace "LKAS ECU" and then go to "Verification of Vehicle Repair" procedure.

▶ Repair as necessary and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика