Component Inspection
1.

IG OFF.

2.

Disconnect the Injector connector.

3.

Measure the resistance of the Injector.

Specification :

Coil Resistance (Ω)

Temp (℃)

Temp (℉)

1.25

20

68

4.

Is the measured resistance within specifications?

▶ Substitute with a known-good PCM(ECM) and check for proper operation.

If the problem is corrected, replace the PCM(ECM) and then go to "Verification of Vehicle Repair" procedure.

▶ Substitute with a known-good component and check for proper operation.

If the problem is corrected, replace the component and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика