Many control units have applied to vehicle as it becomes more eletrolnical. These units control their own system based on information from diverse sensors. Therefore necessity of common use of diverse sensor information and importance of stable power supply are gathering strength. Battery sensor is mounted on battery (-) terminal. It transmits battery voltage, current, temperature information to PCM. PCM controls generating voltage by duty cycle based on these signals.
PCM sets this code when there is an error in LIN communication line.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
Signal Monitoring | 1. Open or short in LIN communication line |
EnableConditions |
•
Engine Run Time ≥ 2 Seconds
•
Ignition Voltage ≥ 11V | |
Threshold value |
•
LIN communication error | |
Diagnosis Time |
•
Continuous | |
MIL On Condition |
•
NO MIL ON(DTC only) |
Fig 1) Signal waveforms of battery sensor
