Monitor GDS Data
C168886
1.

Connect GDS to Data Link Connector(DLC).

2.

IG "ON" or ENG "ON".

3.

Check if the GDS displays a fault code.

4.

Using the GDS, check if there is any fault in the MDPS system.

If there is a fault in the MDPS system, repair the system as necessary. Select the LKAS system and monitor the DTC.

▶ Go to next procedure.

▶ Repair as necessary and then go to "Verification of Vehicle Repair" procedure.

C168887
5.

Connect GDS to Data Link Connector(DLC).

6.

IG "ON" or ENG "ON".

7.

Check if the GDS displays a fault code.

Clear the fault code with the GDS, and then run the engine at 60 km/h to see if the Malfunction Indicator Lamp is turned on again.

8.

Using the GDS, check to see if there is any fault in the MDPS system.

If there is a fault in the MDPS system, repair the system, select the LKAS system and monitor the DTC.

▶ Go to next procedure.

▶ Repair as necessary and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика