Monitor GDS Data
1.

Connect GDS to Data Link Connector(DLC).

2.

Using a GDS, clear DTCs.

3.

IG OFF and then, IG ON,again.

4.

Again using scantool, Check DTC present.

5.

Is the same DTC shown, agian?

▶ Substitute with a known-good TPMS receiver module and check for proper operation.

▶ If the problem is corrected, replace TPMS receiver module and then go to "Verification of Vehicle Repair" procedure.

▶ Fault is intermittent. It has been repaired and TPMS receiver module memory is not cleared yet.

▶ Go to "Verification of vehicle Repair" procedure.

Яндекс.Метрика