1.
Remove the following items;
A.
Engine cover (A).
B.
Air cleaner assembly and air duct (B). (Refer to "Intake and Exhaust system" in EM group.)
C.
Battery and battery tray (C). (Refer to "Charging system" in EE group.)
Remove the following items;
Engine cover (A).
Air cleaner assembly and air duct (B). (Refer to "Intake and Exhaust system" in EM group.)
Battery and battery tray (C). (Refer to "Charging system" in EE group.)
Remove the ground line after removing the bolt (A).
Dissconnect the solenoid valve connector (A) and inhibitor switch connector (B).
Remove the control cable (C) after removing the nut (A) and the bolt (B).
Tightening torque:
(A) 7.8 ~ 11.8 N.m (1.0 ~ 1.5 kgf.m, 5.8 ~ 8.7 lb-ft)
(B) 14.7 ~21.6 N.m(1.5 ~ 2.2 kgf.m, 10.9 ~ 15.9 lb-ft)
Remove the solenoid valve connector and inhibitor switch connector wiring mounting bracket (A).
Disconnect the hose (B) after removing the automatic transaxle fluid cooler hose clamp (A).
Remove the wiring bracket installation bolt (A).
Using the engine support fixture (Support sst No.: 09200-38001) hold the engine and adapter.
Remove the automatic transaxle upper mounting bolt (A-2ea) and the starter motor mounting bolt (B-2ea).
Tightening torque:
(A),(B): 42.2 ~ 54.0 N.m (4.3 ~ 5.5 kgf.m, 31.1 ~ 39.8 lb-ft)
Remove the cover (A).
Remove the automatic transaxle support bracket mounting bolt (A).
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 Kgf.m, 65 ~ 79.5 lb-ft)
Remove the automatic transaxle mounting support bracket (C).
Tightening torque:
(A) 78.4 ~ 98 N.m (8.0 ~ 10.0 kgf.m, 57.8 ~ 72.3 lb-ft),
(B) 58.8 ~ 78.4 N.m (6.0 ~ 8.0 kgf.m, 43.3 ~ 57.8 lb-ft)
Lift the vehicle with a jack.
Remove the under cover (A).
Tightening torque:
7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft)
Remove the wiring bracket installation bolt (A).
Remove the following items(Refer to " Drive shaft assembly " in DS group.)
Drive shaft assembly. (Refer to "Drive shaft assembly " in DS group.)
Sub frame assembly. (Refer to "Front suspension system" in SS group.)
Remove the drive shaft cover.
Remove the dust cover (A).
Remove the torque converter mounting bolt (A-4ea) with rotating the crankshaft.
Tightening torque:
45.1 ~ 52.0 N.m (4.6 ~ 5.3 kgf.m, 33.3 ~ 38.3 lb-ft)
Remove the automatic transaxle with a jack after removing the mounting bolt (A-4ea, B-2ea).
Tightening torque:
(A) 42.2 ~ 48.1 N.m (4.3 ~ 4.9 kgf.m, 31.1 ~ 35.4 lb-ft)
(B) 42.2 ~ 54.0 N.m (4.3 ~ 5.5 kgf.m, 31.1 ~ 39.8 lb-ft)
