5.
Turn the bulb and socket (A) counter clockwise to remove the turn signal bulb.
Turn the head lamp switch off.
Disconnect the power connector from the lamp.
Remove the head lamp (Low) cap.
Disconnect the connector (A).
Turn the bulb and socket (A) counter clockwise to remove the turn signal bulb.
Installation is the reverse of removal.
Turn the head lamp switch off.
Disconnect the power connector from the lamp.
Remove the head lamp (Low) cap.
Remove the clip (B) and ignitor connector (A) from the lamp assembly.
Remove the head lamp (Low) ignitor.
Installation is the reverse of removal.
Turn the head lamp switch off to avoid high voltage
Be careful not to damage the bulb and use genuine bulbs only
Do not apply excessive force and fit it correctly.
Confirm the bulb locking
Turn the head lamp switch off.
Remove the head lamp cap.
Remove the connector after pressing the pin(A).
Remove the bulb(B) after removing the clip(A).
Turn the head lamp switch off.
Remove the head lamp assembly.
Disconnect the power connector from the lamp.
Remove the ballast (A) after removing the screws (3EA) and connector.
Be careful not to be damaged when disconnecting the ballast connector.
Installation is the reverse of removal.
Turn the head lamp switch off to avoid high voltage.
HID lamp shall not be used on other cars.(Fire may occur.)
Fire may occur when HID lamp initially lights due to the fact that arc-discharge generates high voltage (max. 20,000V) and high current (12-13A), and are different from the halogen lamp specification.
Install the dust cover after confirming the locking state between bulb and bulb holder.
When testing the HID head lamp, turn the power on or off with switch between power supply and lamp because of high voltage.
Do not operate the head lamp switch with the bulb not installed, because it generates spark momently.
Turn the head lamp power off.
Disconnect the power connector from the lamp.
Remove the head lamp (High) cap.
Remove the connector (A) and fixing clip (B).
Remove the head lamp (High) bulb.
Installation is the reverse of removal.
