4.
Verify that the intake actuator operates to the fresh position when connecting in the reverse.
1. - 2. – 3. Fresh 4. 5V (Vcc) | 5. Feedback Signal 6. Sensor Ground 7. Recirculation |
Ignition "OFF".
Disconnect the intake actuator connector.
Verify that the actuator operates to the recirculation position when connecting 12V to the terminal 3 and grounding terminal 7.
Verify that the intake actuator operates to the fresh position when connecting in the reverse.
1. - 2. – 3. Fresh 4. 5V (Vcc) | 5. Feedback Signal 6. Sensor Ground 7. Recirculation |
If the intake actuator is not operated well, substitute with a known-good intake actuator and check for proper operation.
If the problem is corrected, replace the intake actuator.
Disconnect the negative (-) battery terminal.
Remove the crash pad.
(Refer to BD group - "Crash Pad")
Disconnect the Intake actuator connector (A)
Loosen the mounting screw and then remove the intake actuator (B).
Installation is the reverse order of removal.
