13454839

Remove the front wheel ＆ tire.

Tightening torque :

88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

caution

Be careful not to damage to the hub bolts when removing the front wheel ＆ tire.

Disconnect the stabilizer link (B) from the front strut assembly (A) after loosening the nut.

Tightening torque :

98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

Remove the tie rod end ball joint (C) from the knuckle by using the SST (09568-34000).

(1)

Remove the split pin (A).

(2)

Remove the castle nut (B).

(3)

Use the SST (09568-34000).

Tightening torque:

34.3 ~ 44.1N.m (3.5 ~ 4.5kgf.m, 25.3 ~ 32.5lb-ft)

caution

●

When using SST, be sure not to damage the dust cover of lower arm ball joint.

●

Keep SST tied to the car because there is a risk of injury by dropping the SST during removing the lower arm ball joint.

●

The peripheral parts may be damaged when removing the lower arm ball joint with a general tool such as lever, so be sure to use SST.

Loosen the bolt & nut and then remove the lower arm (A).

Tightening torque :

98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box.

Tightening torque :

29.4 ~ 34.3N.m (3.0 ~ 3.5kgf.m, 21.7 ~ 25.7lb-ft)

caution

●

Keep the neutral-range to prevent the damage of the clock spring inner cable when you handle the steering wheel.

●

Do not use the bolt again.

Loosen the bolt (A) & nut (B) and then remove the roll rod stopper.

Tightening torque :

107.9 ~ 127.5N.m (11.0 ~ 13.0kgf.m, 79.6 ~ 94.0lb-ft)

Loosen the bolts & nuts and then remove the sub frame (A).

Tightening torque

Sub frame mounting bolts & nuts:

156.9 ~ 176.5N.m (16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)

Sub frame stay bolts & nuts:

44.1 ~ 58.8N.m (4.5 ~ 6.0kgf.m, 32.5 ~ 43.4lb-ft)

10.

Loosen the bolt and then remove the steering gear box (A).

Tightening torque :

88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)