1.
Remove the rear wheel ＆ tire.
Tightening torque:
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
caution
Be careful not to damage the hub bolts when removing the rear wheel & tire.
Remove the rear wheel ＆ tire.
Tightening torque:
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage the hub bolts when removing the rear wheel & tire.
Set up the transmission jack (A) under the lower arm (B).
Loosen the nut and then remove the rear stabilizer link (A) from the lower arm and subframe.
Tightening torque:
98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
Loosen the bolt & nut and then remove the rear lower arm (A) with the rear axle.
Tightening torque:
137.3~156.9N.m(14.0~16.0Kgf.m, 101.3~115.7lb-ft)
When removing the bolt, remove the upper arm in no-load condition by using the transmission jack.
Loosen the bolt & nut and then remove the rear lower arm (A) from the sub frame.
Tightening torque:
107.9~117.7N.m(11.0~12.0Kgf.m, 79.6~86.8lb-ft)
When removing the bolt, remove the lower arm in no-load condition by using the transmission jack.
Check the bushing for wear and deterioration.
Check the rear lower arm for deformation.
Check the coil spring and spring pad for deterioration and deformation.
Check for all bolts and nut.
