4.
Monitor the parameter of "Battery Level" on the screen.
Specification : 'Battery Level' is 'OK'.
Fig.1) A method of checking a sensor ID with TPMS Exciter
Fig.2) Data displayed by TPMS Exciter
Set up 'GDS' with 'GDS TPMS'.
Select "Vehicle S/W Management" function.
Select the "Sensor Status" mode of "Data Treatment" item.
Monitor the parameter of "Battery Level" on the screen.
Specification : 'Battery Level' is 'OK'.
Fig.1) A method of checking a sensor ID with TPMS Exciter
Fig.2) Data displayed by TPMS Exciter
Is parameter within specifications?
 | ▶ Fault is intermittent. It has been repaired and TPMS receiver module memory is not cleared yet. ▶ Go to "Verification of vehicle Repair" procedure. |
 | ▶ Replace Front Right WE sensor and register sensor ID with 'GDS TPMS'. ▶ Go to "Verification of Vehicle Repair" procedure. |
