7981151

1.

IG "OFF".

2.

IG "ON".

3.

Connect GDS and select "Diagnostic Trouble Codes(DTCs)" mode.

4.

Using a GDS, Clear DTC.

5.

Select "Diagnostic Trouble Codes(DTCs)" mode again.

6.

Is the measured resistance within specifications ?

▶ The main cause of this code is that improper CAN signal from cluster system is detected.

▶ Check DTCs in cluster system. If there is a code in cluster system, Repair according to DTC diagonositic guide of cluster system.

▶ This fault may be intermittently caused by poor connection in the cluster or HECU connector or was repaired and HECU memory was not cleared. Go to "Verification of Vehicle Repair" procedure.